Transistors By INVENTO

• It utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for,
• provides the designer with an extremely efficient and reliable device for use in a wide variety of applications.
• The TO-220 package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 contribute
• 175 degreeC Operating Temperature; P-Channel
• Package Include 1 x IRF9504N

• CD4093BE consists of four Schmitt trigger circuits. Each circuit functions as a two input NAND gate with Schmitt trigger action on both inputs. The gate switches at different points for positive- and negative-going signals. The difference between the positive voltage (VP) and the negative voltage (VN) is defined as hysteresis voltage (VH).
• Schmitt trigger action on each input with no external components. Hysteresis voltage typically 0.9 V at VDD = 5V and 2.3V at VDD = 10V. Maximum input current of 1?A at 18V over full package temperature range, 100nA at 18V and 25 degreeC.
• Logic Family / Base Number: CD4093; Logic Type: NAND Schmitt Trigger; Output Current: 6.8mA; No. of Inputs: 2
• Supply Voltage: 3V - 18V; No. of Pins: 14Pins; Logic IC Family: CD4000; Logic IC Base Number: 4093.
• Package Include 4 x 4093 IC

• Peak Reverse Voltage (Vrsm): 500V
• Peak Off-State Voltage(Vdsm): 500V
• On-State Current (It): 2.0A
• Gate Trigger Current (Igt): 200?A; Gate Trigger Voltage (Vgt): 0.8V
• Package Include: 2 x 2P4M-2A Thyristor

• Logic Family / Base Number: CD4030; Logic Type: XOR Gate; Output Current: 6.8mA.
• No. of Inputs: 2; Supply Voltage Min: 3V; Supply Voltage Max: 18V
• No. of Pins: 14Pins; Logic IC Family: CD4000.
• Logic IC Base Number: 4030; Operating Temperature Min: -55 degreeC; Operating Temperature Max: 125 degreeC.
• Package Include 3 x 4030 IC

• Output Current up to 1.5A
• Thermal Overload Protection
• Output transition SOA protection
• Hole Diameter : 3.8mm
• Body Size : 29 x 10 x 5mm

• The CD4518BE is a CMOS dual BCD Up-counter consist of two identical, internally synchronous 4-stage counters. The counter stages are D-type flip-flops having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or negative-going transition.
• For single-unit operation the ENABLE input is maintained high and the counter advances on each positive-going transition of the CLOCK. The counters are cleared by high levels on their RESET lines. The counter can be cascaded in the ripple mode by connecting Q4 to the enable input of the subsequent counter while the CLOCK input of the latter is held low.
• Logic Family / Base Number: CD4518; Counter Type: BCD, Up; Clock Frequency: 8 MHz; Count Maximum: 9
• No. of Pins: 16Pins; Supply Voltage: 3V - 18V; Logic IC Base Number: 4518
• Package Include: 4 x 4518 IC

• Logic Type: Counter, Decade; Direction: Up; Number of Bits per Element: 4
• Number of Elements: 1; Reset: Asynchronous; Timing: Synchronous
• Count Rate: 66MHz; Trigger Type: Positive Edge
• Voltage - Supply: 2V ~ 6V; Operating Temperature: -40 degreeC ~ 125 degreeC
• Package Include: 2 x 74160 IC

• HCF4000BE are monolithic integrated circuit, available in 14-lead dual in line plastic or ceramic package and plastic micro package. Nor gate provide the system designer with direct implementation of the nor function and supplement the existing family of COS/MOS gates. All inputs and outputs are buffered.
• PROPAGATION DELAY TIME = 60 ns (typ.) AT CL = 50 pF, VDD = 10 V. . BUFFERED INPUTS AND OUTPUTS
• STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS. QUIESCENT CURRENT SPECIFIED TO 20 V FOR HCC DEVICE
• 5V, 10V AND 15V PARAMETRIC RATINGS .INPUT CURRENT OF 100nA AT 18V AND 25 degree celcius FOR HCC DEVICE
• Package Include 2 x 4000 IC

• The 4009UB is a Hex Buffer/Converter may be used as CMOS to TTL or DTL logic-level converter or CMOS high-sink-current driver. It features maximum input current of 1?A at 18V over full temperature range, 100nA at 18V and 25 degreeC.
• Logic Device Type: Buffer, Inverting; Logic Family / Base Number: CD4009
• No. of Pins: 16Pins; Supply Voltage Min: 3V
• Supply Voltage Max: 18V; Logic IC Family: CD4000; Logic IC Base Number: 4009
• Package Include 2 x 4009 IC

• The 74HC/HCT193 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT193 are 4-bit synchronous binary up/down counters. Separate up/down clocks, CPU and CPD respectively, simplify operation.
• The outputs change state synchronously with the LOW-to-HIGH transition of either clock input. If the CPU clock is pulsed while CPD is held HIGH, the device will count up. If the CPD clock is pulsed while CPU is held HIGH, the device will count down. Only one clock input can be held HIGH at any time, or erroneous operation will result. The device can be cleared at any time by the asynchronous master reset input (MR); it may also be loaded in parallel by activating the asynchronous parallel load.
• Clock Frequency: 47MHz; Count Maximum: 15; Supply Voltage: 4.5V - 5.5; Logic IC Base Number: 74193
• Synchronous reversible 4-bit binary counting; Asynchronous parallel load; Asynchronous reset; Expandable without external logic; Output capability: standard; ICC category: MSI
• Package Include: 1 x 74193 IC

• The CD4028BE is a MOS BCD-to-Decimal or Binary-to-Octal Decoder/Driver consisting of buffering on all 4 inputs, decoding-logic gates and 10 output buffers. A BCD code applied to the four input, A to D, results in a high level at the selected one of 10 decimal decoded outputs.
• Similarly, a 3-bit binary code applied to inputs A through C is decoded in octal code at output 0 to 7 if D=0. High drive capability is provided at all outputs to enhance DC and dynamic performance in high fan-out applications. It is suitable for code conversion, indicator-tube decoder and address decoding-memory selection control.
• BCD-to-decimal decoding or binary-to-octal decoding; High decoded output drive capability; Medium-speed operation; Standardized, symmetrical output characteristics; Maximum input current of 1?A at 18V.
• Logic Family / Base Number: CD4028; Logic Type: BCD to Decimal Decoder; No. of Outputs: 10 No. of Pins: 16 Pins; Outputs; Supply Voltage: 3V -18V; Logic IC Base Number: 4028
• Package Include: 2 x 4028 IC

• The CD4024BE is a CMOS 7-stage ripple-carry binary Counter/Divider with master-slave flip-flops counter stages. The state of a counter advances one count on the negative transition of each input pulse a high level on the RESET line resets the counter to its all zeros state. Schmitt trigger action on the input-pulse line permits unlimited rise and fall times. All inputs and outputs are buffered.
• Medium-speed operation; Fully static operation; Buffered inputs and outputs; Standardized, symmetrical output characteristics; Fully static operation; Maximum input current of 1?A at 18V.
• Logic Family / Base Number: CD4024; Counter Type: Ripple Carry Binary / Divider; Clock Frequency: 24MHz; Count Maximum: 7.
• No. of Pins: 14Pins;Supply Voltage : 3V - 18V; Logic IC Family: CD4000; Logic IC Base Number: 4024.
• Package Include: 4 x 4024 IC

• The CD4082BE is a CMOS dual 4-input AND Gate. The device provide the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates. The device features standardized and symmetrical output characteristics.
• 60ns Medium-speed operation; 2.5V at VDD = 15V Noise margin. 5V, 10V and 15V Parametric ratings
• Logic Type: AND; Output Current: 6.8mA; No. of Inputs: 4.
• Supply Voltage: 3V - 18V; No. of Pins: 14Pins; Logic IC Base Number: 4082
• Package Include 4 x 4082 IC

• The SN74HC20D is a dual 4-input positive-NAND Gate contains two independent circuits. This device performs the Boolean function Y = (A B C D) or Y = A + B + C + D in positive logic.
• 20?A Maximum ICC low power consumption; 11ns Propagation delay (tPD); 4mA Output drive at 5V; 1?A Maximum low input current; Outputs can drive up to 10 LSTTL loads; Green product and no Sb/Br.
• Logic Family / Base Number: 74HC20; Logic Type: NAND; Output Current: 5.2mA; No. of Inputs: 4
• Supply Voltage Min: 2V; Supply Voltage Max: 6V; No. of Pins: 14Pins; Logic IC Family: 74HC; Logic IC Base Number: 7420
• Package Include 4 x 7420 IC

• The SN74HC05N is a 1-input 14-pin Hex Inverter made of CU NIPDAU lead/ball finish. The device contains six independent inverters. It performs the Boolean function Y = A in positive logic. The open-drain outputs require pull-up resistors to perform correctly.
• It may be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions.
• Logic Family / Base Number: 74HC05; Logic Type: Inverter; Output Current: 25mA; No. of Inputs: 1
• Supply Voltage Min: 2V; Supply Voltage Max: 6V; No. of Pins: 14Pins; Logic IC Base Number: 7405
• Package Include 5 x 7405 IC

• The MC14012B dual 4input NAND gates are constructed with PChannel and NChannel enhancement mode devices in a single monolithic structure (Complementary MOS). Their primary use is where low power dissipation and/or high noise immunity is desired.
• Supply Voltage Range = 3.0 Vdc to 18 Vdc. Capable of Driving Two LowPower TTL Loads or One LowPower Schottky TTL Load Over the Rated Temperature Range.
• Logic Type: NAND; Output Current: 6.8mA; No. of Inputs: 4
• No. of Pins: 14Pins; Logic IC Base Number: 4012
• Package Include 4 x 4012 IC