Transistors By INVENTO

• The CD4510BE is a CMOS Presettable BCD Up/Down Counter consist of four synchronously clocked D-type flip-flops (with a gating structure to provide T-type flip-flop capability) connected as counters. This counter can be cleared by a high level on the RESET line and can be pre-set to any binary number present on the jam inputs by a high level on the PRESET ENABLE line.
• The CD4510B will count out of non-BCD counter states in a maximum of two clock pulses in the up mode and a maximum of four clock pulses in the down mode. If the CARRY-IN input is held low, the counter advances up or down on each positive-going clock transition. Synchronous cascading is accomplished by connecting all clock inputs in parallel and connecting the CARRY-OUT of a less significant stage to the CARRY-IN of a more significant stage.
• The counter can be cascaded in the ripple mode by connecting the CARRY-OUT to the clock of the next stage. Synchronous internal carry propagation. Reset and pre-set capability. Standardized, symmetrical output characteristics.
• Logic Family / Base Number: CD4510; Counter Type: Presettable Binary, Up / Down; Clock Frequency: 8 MHz; Count Maximum: 4; No. of Pins: 16 Pins; Supply Voltage: 3V - 18V; Logic IC Base Number: 4510.
• Package Include: 2 x 4510 IC

• The CD4081BE AND gate provides the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.
• Logic Family / Base Number: CD4081; Logic Type: AND; Output Current: 6.8mA.
• No. of Inputs: 2; Supply Voltage Min: 3V; Supply Voltage Max: 18V.
• No. of Pins: 14Pins; Logic IC Family: CD4000; Logic IC Base Number: 4081.
• Package Include 2 x 4081 IC

• The CD4072BE is a CMOS dual 4-input OR Gate provides the system designer with direct implementation of the positive-logic OR functions and supplements the existing family of CMOS gates.
• Medium speed operation - tPLH, tPHL = 60ns (typical) at VDD=10V. Maximum input current of 1?A at 18V.
• Logic Family / Base Number: CD4072; Logic Type: OR; Output Current: 6.8mA; No. of Inputs: 4.
• Supply Voltage: 3V - 18V; No. of Pins: 14Pins; Logic IC Family: CD4000; Logic IC Base Number: 4072.
• Package Include 2 x 4072 IC

• The CD4068BE is a CMOS 8-input NAND/AND Gate provides the system designer with direct implementation of the positive-logic 8-input NAND and AND functions and supplements the existing family of CMOS gates.
• Medium speed operation - tPHL, tPLH=75ns (typical) at VDD=10V. Buffered inputs and outputs. Standardized symmetrical output characteristics. Maximum input current of 1?A at 18V.
• Logic Family / Base Number: CD4068; Logic Type: AND / NAND; Output Current: 6.8mA.
• No. of Inputs: 8; Supply Voltage: 3V - 18V; No. of Pins: 14Pins; Logic IC Base Number: 4068.
• Package Include 4 x 4068 IC

• The 4070BE is a CMOS quad Exclusive-OR Gate contains four independent Exclusive-OR gates.
• Medium speed operation - tPHL, tPLH=65ns (typical) at VDD=10V, CL=50pF. Maximum input current of 1?A at 18V. Standardized symmetrical output characteristics.
• Logic Type: XOR; Output Current: 6.8mA; No. of Inputs: 2
• Supply Voltage: 3V - 18V; No. of Pins: 14Pins; Logic IC Base Number: 4070
• Package Include 2 x 4070 IC

• The 74HC42N is a BCD to Decimal Decoder pin compatible with low power Schottky TTL (LSTTL). This decoder accepts four active high BCD inputs and provides 10 mutually exclusive active low outputs. The active low outputs facilitate addressing other MSI circuits with active low input enables.
• The logic design of the 42 series ensures that all outputs are high when binary codes greater than nine are applied to the inputs. The most significant input (A3) produces an useful inhibit function when the 42 series is used as a 1-of-8 decoder. The A3 input can also be used as the data input in an 8-output demultiplexer application.
• Mutually exclusive outputs; 1-of-8 Demultiplexing capability; Outputs disabled for input codes above nine; Standard output capability.
• Logic Family / Base Number: 74HC42; Logic Type: BCD to Decimal Decoder; No. of Outputs: 10 Outputs; No. of Pins: 16Pins; Supply Voltage: 2V - 6V; Logic IC Base Number: 7442; Logic IC Family: 74HC.
• Package Include: 2 x 7442 IC

• Output Voltage: -12 volts (negative)
• 7912 provides a regulated supply of -12 V and 1A current
• Its additional features include internal thermal overload protection, short circuit protection and output transistor safe operating area compensation
• Voltage fluctuations may damage or reduce the life of circuit components. Usage of voltage regulator ICs helps in avoiding such events by maintaining voltage at the required levels
• Package Include: 5 x 7912 Voltage Regulator

• The CD4516BE is a CMOS presettable binary Up/Down Counter consists of four synchronously clocked D-type flip-flops connected as counters. This counter can be cleared by a high level on the RESET line and can be pre-set to any binary number present on the jam inputs by a high level on the PRESET ENABLE line. If the CARRY-IN input is held low, the counter advances up or down on each positive-going clock transition.
• Synchronous cascading is accomplished by connecting all clock inputs in parallel and connecting the CARRY-OUT of a less significant stage to the CARRY-IN of a more significant stage. The CD4516B can be cascaded in the ripple mode by connecting the CARRY-OUT to the clock of the next stage.
• If the UP/DOWN input changes during a terminal count, the CARRY-OUT must be gated with the clock and the UP/DOWN input must change while the clock is high. This method provides a clean clock signal to the subsequent counting stage.
• Logic Family / Base Number: CD4516; Counter Type: Binary, Up / Down; Clock Frequency: 11 MHz; Count Maximum: 15: No. of Pins: 16 Pins; Supply Voltage: 3V - 18V; Logic IC Base Number: 4516.
• Package Include: 2 x 4516 IC

• The SN74HC4020N is a 14-bit Asynchronous Binary Counter that advance on the negative-going edge of the clock pulse. The counters are reset to zero (all outputs low) independently of the clock input when the clear (CLR) input goes high.
• Outputs can drive up to 10 LSTTL loads; 80?A Maximum low power consumption; 12ns Typical tpd; 4mA Output drive at 5V; 1?A Maximum low input current.
• Logic Family / Base Number: 74HC4020; Counter Type: Binary, Asynchronous; Clock Frequency: 53MHz; Count Maximum: 14
• No. of Pins: 16Pins; Supply Voltage: 2V - 6V; Logic IC Family: 74HC; Logic IC Base Number: 744020.
• Package Include: 2 x 744020 IC

• The HEF4071BP is a quad 2-input OR Gate with fully buffered for highest noise immunity and pattern insensitivity to output impedance variations. It operates over a recommended VDD power supply range of 3 to 15V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS or another input.
• Logic Family / Base Number: HEF4071; Logic Type: OR; Output Current: 2.4mA.
• No. of Inputs: 2; Supply Voltage Min: 3V; Supply Voltage Max: 15V.
• No. of Pins: 14Pins; Logic IC Family: HEF4000; Logic IC Base Number: 4071.
• Package Include 3 x 4071 IC

• The CD4029BE is a CMOS presettable Up/Down Counter consists of a four-stage binary or BCD-decade up/down counter with provisions for look-ahead carry in both counting modes. The inputs consist of a single Clock, Carry-In (Clock Enable), Binary/Decade, Up/Down, Preset Enable and four individual JAN signals, Q1, Q2, Q3, Q4 and a carry out signal are provided as outputs.
• A high preset enable signal allows information on the jam inputs to preset the counter to any state asynchronously with the clock. A low on each JAM line, when the preset-enable signal is high, resets the counter to its zero count. The counter is advanced one count at the positive transition of the clock when the carry-in and preset enable signals are low. Advancement is inhibited when the carry-in or preset enable signals are high.
• The CARRY-OUT signal is normally high and goes low when the counter reaches its maximum count in the UP mode or the minimum count in the down mode provided the carry-in signal is low.
• Medium-speed operation; Multi-package parallel clocking for synchronous high speed output; Preset Enable and individual Jam inputs provided; Binary or decade up/down counting; BCD outputs in decade mode; Maximum input current of 1?A at 18V.
• Package Include: 2 x 4029 IC

• The CD4520BE is a CMOS dual binary Up-counter consists of two identical, internally synchronous 4-stage counters. The counter stages are D-type flip-flops having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or negative-going transition. For single-unit operation the ENABLE input is maintained high and the counter advances on each positive-going transition of the CLOCK.
• The counter is cleared by high levels on their RESET lines. The counter can be cascaded in the ripple mode by connecting Q4 to the enable input of the subsequent counter while the CLOCK input of the latter is held low.
• Logic Family / Base Number: CD4520; Counter Type: Binary, Up; Clock Frequency: 8MHz; Count Maximum: 15
• No. of Pins: 16Pins; Supply Voltage: 3V - 18V; Logic IC Base Number: 4520
• Package Include: 2 x 4520 IC

• The 74HCT393N is a 4-stage dual Binary Ripple Counter features a clock input (nCP), an overriding asynchronous master reset input (nMR) and 4 buffered parallel outputs (nQ0 to nQ3). The counter advances on the high-to-low transition of nCP. A high on nMR clears the counter stages and forces the outputs low, independent of the state of nCP. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
• Two 4-bit Binary counters with individual clock. Two Master resets to clear each 4-bit counter individually. CMOS Input levels.
• Logic Family / Base Number: 74HCT393; Counter Type: Binary; Clock Frequency: 107MHz; Count Maximum: 15; No. of Pins: 14Pins
• Supply Voltage: 4.5V - 5.5V; Logic IC Family: 74HCT; Logic IC Base Number: 74393
• Package Include: 4 x 74393 IC

• he SN74HC4040N is a 12-bit Asynchronous Binary Counter with the outputs of all stages available externally. A high level at the clear (CLR) input asynchronously clears the counter and resets all outputs low. The count is advanced on a high-to-low transition at the clock input. Applications include time-delay circuits, counter controls and frequency-dividing circuits.
• Outputs can drive up to 10 LSTTL loads. 80?A Maximum low power consumption. 12ns Typical tpd. 4mA Output drive at 5V. 1?A Maximum low input current.
• Logic Family / Base Number: 74HC4040; Counter Type: Binary, Asynchronous; Clock Frequency: 53MHz; Count Maximum: 12.
• No. of Pins: 16Pins; Supply Voltage: 2V -6V; Supply Voltage Max: 6V; Logic IC Base Number: 744040.
• Package Include: 2 x 744040 IC