Electrical Components - Electrical Diodes

• Case : SMA
• Maximum respective peak reverse voltage : 1000v
• Maximum average rectified current : 1.0A
• Maxim reverse current : 5.0?A
• Non-Repetitive Peak Forward Surge Current : 30A

• Each LED should have a 'Forward Voltage' label that specifies the amount of voltage needed to carry power and create light.
• You can power any of the 5mm LEDs except the reds and yellows without bothering about keeping track of the current.
• The current ratings of 5mm LEDs are substantially lower, often around 15-30mA, and we may limit the current by connecting a resistor to the LED.
• Input Voltage = LED Vf + Resistor Voltage Resistor Voltage = Input Voltage LED Vf Voltage Across Resistor = 4.5V 3.4V
• 5mm LEDs brightness is usually measured in millicandelas (mcd), but there is much more to this than just putting a certain number of brightness on any LED.

• Manufacturer Part No: SS210
• Forward Current: 1.5 A; Repetitive Reverse Voltage: 100 V
• Forward Voltage: 950 mV Forward Surge Current: 75 A; Reverse Current: 30 uA
• Maximum Operating Temperature: + 150 C; Operating Temperature: -55 degreeC ~ 150 degreeC
• Mounting Style: SMD/SMT; Package/Case: SMB (DO-214AA)

• 10MM RGB Auto Flash Multicolor Changing Transparent Bright LED, DC 3 Volt
• Flash Type : Auto Slow and Fast
• Multipurpose For Science Projects DIY Hobby Kit, Electronic Devices
• Package Contains - 30 Pieces

• Voltage Rating: 12V
• Power Rating: 250mW
• High reliability
• Very sharp reverse characteristic
• Vz-tolerance: + 5%

• Low Power Loss and High Efficiency
• Through Hole with #10 Screw Mounting
• Electrically Isolated Metal Case for Maximum Heat Dissipation
• Case to Terminal Isolation Voltage of 2500V
• Low Reverse Leakage Current

• 3.6V ZENER DIODE (3.6V)
• 20 Pieces

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• It is a semiconductor device.
• It is BA159.
• It has two terminals: the anode and the cathode.

• 5 IR-Led(Transmitter) + 5 Photo Diode(Receiver)
• Ideal for IR sensors

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• max. voltage :- 100 V
• max. current :- 450 mA
• High switching speed: max. 4 ns for General application

• Nominal Zener Voltage (Vz): 6.8V
• Maximum Regulator Current (Izm): 0.055A
• Max. Reverse Leakage Current (Ir): 0.1?A
• Forward Voltage Drop (Vf): 1.5V
• Total Power Dissipation (Ptot): 500mW

• High reliability
• Very sharp reverse characteristic
• Vz-tolerance: + 5%
• Voltage Rating: 10V
• Power Rating: 250mW

• Tested and 100% Working
• Housing Material: Copper
• Laser diode of 1pc
• Housing Material: Copper
• Operating Voltage (VDC):