Hydraulic & Pneumatic Equipment

• Machined components are manufactured using solid steel bar stock
• Chrome steel ball valve is mechanically seated to improve low pressure sealing performance
• Steel componentry is plated using ROHS Compliant Trivalent Chrome
• Urethane seal is standard in ball valve couplers and provides resistance to extrusion when subjected to high pressure - temperature range -40 degree F to +180 degree F -40 degree C to +82 degree C)
• Maximum pressure 10000 psi

• 90DEG FULL F | GROCO | FFC-750

• Male double spud for connecting steam hose fittings
• Plated iron for strength and durability
• 1-1/4\" male ends for connecting two female stems
• Polymer seat for resistance to chemicals
• Maximum temperature of 450 degrees F

• Designed for water, food, and air applications
• Can be used with selct gasses, vacuum and liquid applications
• Made from NSF approved non-toxic materials
• Single action allows the tube to release and connect easily

• Flare cap for terminating/closing pipe end
• It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
• Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
• Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
• These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

• Package Includes - 1 x 3/8\" to 1/2\" water line adapter. If you have any questions, please feel free to contact us. We will do our best to provide you with a satisfactory solution.
• Stainless Steel Material- The pressure gauge reducer adapter ?is made of 304 stainless steel material, the adapter is corrosion resistant and rust proof.
• Size - NPT 3/8\" to 1/2\" water line adapter.
• Water Line Adapter - Hex bushing adapter for connecting pipes or fittings , can be easily threaded to an angle to connect your flexible water hose, easy to replace.
• Pipe Fitting Accessories - NPT reducer for connecting NPT threaded fittings and pipes, can be used in the kitchen, bathroom sink, dishwasher, hot water heater, instrumentation and hydraulic systems etc.

• Package Includes - 4pcs grease gun needle tips and 1pcs narrow needle greaser adapter. If you have any questions, please feel free to contact us. We will do our best to provide you with a satisfactory solution.
• Grease Gun Fittings Material- Grease gun kit ?is made of high quality 304 stainless steel and plastic material, durable, long-lasting, can be used for a long time. Working pressure up to 6000psi.
• Grease Nozzle Size- grease gun needle tip length 64.3mm, 2mm mini pinhole, compatible with various grease guns, can better control the amount of grease, reduce waste. The grease injector needle length is 38mm, which is easier to reach the narrow and deep hole area and is convenient to use.
• Bearing Grease Needle ?- Used for distributing grease, suitable for most hand grease guns, grease gun couplings, oil needle adapters, needle injection nozzles, butter gun nipples and other oil gun accessories of various metal parts.
• Grease Gun Accessories - Oil needle adapters are widely used in various mechanical metal parts, cars and trucks, agriculture, ships, lawn mowers, automobiles, farm tractors, and are suitable for construction machinery, prevent metal parts from rusting, make the machine run smoothly.

• Package Includes - 5pcs x stainless steel pipe fitting hex nipple. If you have any questions, please feel free to contact us. We will do our best to provide you with a satisfactory solution.
• Brass Fittings Material- Pressure gauge reducer adapter ?is made of stainless steel material, adapter is corrosion resistance andcan be used in wet environments.
• Size- 1/2\" NPT Male x 1/2\" NPT Male .
• Brass Pipe Fitting - Adapters for connecting pipes or fittings , simple installation, easy to replace.
• Pipe Fitting Adapter Accessories - 1/2\" npt nipple ?is widely used in pipeline connection, CNC machine tools, automatic lathes, injection molding machines, buildings, water heating, hydraulic, instrumentation, etc.

• 2404-04-08 Hydraulic Hose Adapter Fitting 1/4\" Male JIC 37 degree Flare (7/16\"-20UNF) - 1/2\" Male (1/2\"-14NPTF) SAE Straight Pipe Joints Tube Connector Carbon Steel
• Material:Carbon Steel
• Use in fluid power systems and other hydraulic applications

• 1501-06-08 Hydraulic Hose Adapter Fitting 3/8\" Male (3/8\"-18NPTF) - 1/2\" Female (1/2\"-14NPSM) Swivel 90 degree Elbow SAE Pipe Joints Tube Connector Carbon Steel
• Material:Carbon Steel
• Use in fluid power systems and other hydraulic applications

• 1501-02-04 Hydraulic Hose Adapter Fitting 1/8\" Male (1/8\"-27NPTF) - 1/4\" Female (1/4\"-18NPSM) Swivel 90 degree Elbow SAE Pipe Joints Tube Connector Carbon Steel
• Material:Carbon Steel
• Use in fluid power systems and other hydraulic applications

• Advanced Design: This flat face hydraulic connect coupler set features an improved valve design, which allows for a rated pressure of 4000 PSI, 45/L high-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines.
• Quick Connecting: The sleeve locking mechanism (with 1/2\" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force.
• Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come.
• Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area.
• High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged with most types of skid steers loaders, such as Bobcat, John Deere, CAT, Case / New Holland, Kubota, and many others.

• Product Name: Home Fitness Stepper Hydraulic Cylinder Accessories.
• Suitable For Stepper, Home Fitness.
• Premium Material And Technology: High Quality Steel, Light Weight, High Hardness, No Rust And Corrosion Resistance. High Precision Cnc Technology.
• Function: Motorcycle Steering Damper Can Provide Better Turn Stability, Reduce Stepper Fatigue And Eliminate Headshake, Improve Lap Time.
• Notice: After Installation, Turn The Head To The Very Right And Very Left To Check Whether There Is Enough Room For The Activity Of Steering Damper Or Not.
• Package Includes:1 Piece Stepper Hydraulic Cylinder Accessories

• 3/8Male Thread To Us 1/8'' Female Thread.
• Precise Threads, To Ensure Tight & Seamless Connection.
• Solid Brass Faucet Body Ensures Quality And Longevity.
• Pipe Fittings Elbows Brass Fittings 3/8 Npt Elbow.
• Package Includes:1x npt adapter

• Direct replacement for CAT 153-2994, Female Hydraulic Flat Face Quick Coupler
• Flush face valve design minimizes fluid loss
• 5,076 PSI rating
• 23.78 GPM Max Flow Rate
• Interchangeable with other ISO 16028 standard couplings