Hydraulic & Pneumatic Equipment

• Specification: Material: Carbon Steel; Overall Size: 46.00 x 27.00 mm/ 1.81 x 1.06 inch (L x W); Outer Diameter: 18.90 mm/ 0.74 inch; Male Thread: M27x1.5mm; Packing List: 2Pcs x Hydraulic Quick Connect Coupler with 2Pcs washer
• Advantage: This quick connector is made of carbon steel and thickened, corrosion resistance, high and low temperature resistance, anti-rust and durable, greatly increased service life. The steel ball is used for locking and docking, and the valve core is automatically closed. And is equipped with a sealing ring to effectively prevent leaks from pipes. The thread is deepened, the connection is firm, and it is not easy to slip.
• Instruction: Easy to use, simply push the male connector into another appropriately sized connector. And then connect the corresponding hydraulic equipment for use.
• Application: This Hydraulic Quick Connect Coupler is used to connect different hydraulic tools and accessories. Easy to connect and quick disconnect. Widely used in connection required by various industries, mainly used in construction equipment, forest equipment, hydraulic implements, petroleum equipment, steel equipment and other hydraulic applications.
• NOTE: 1.Please kindly note that correct size before buying. 2.The working temperature range of this connector is -20 degreeC to 120 degreeC.

• Specification: Material: Carbon Steel; Overall Size: 65.00 x 21.00 mm/ 2.56 x 0.83 inch (L x W); Outer Diameter: 35.00 mm/ 1.38 inch; Female Thread: G3/8; Packing List: 1Pcs x Hydraulic Quick Connect Coupler
• Advantage: This quick connector is made of carbon steel and thickened, corrosion resistance, high and low temperature resistance, anti-rust and durable, greatly increased service life. The steel ball is used for locking and docking, and the valve core is automatically closed, prevent leaks from pipes. The thread is deepened, the connection is firm, and it is not easy to slip.
• Instruction: Easy to use, simply push the male connector into another appropriately sized connector. And then connect the corresponding hydraulic equipment for use.
• Application: This Hydraulic Quick Connect Coupler is used to connect different hydraulic tools and accessories. Easy to connect and quick disconnect. Widely used in connection required by various industries, mainly used in construction equipment, forest equipment, hydraulic implements, petroleum equipment, steel equipment and other hydraulic applications.
• NOTE: 1.Please kindly note that correct size before buying. 2.The working temperature range of this connector is -20 degreeC to 120 degreeC.

• 1/2\" Hose X 1/2\" Male NPT Reusable Hose Fitting
• Compatible for R1/R2/R16 Hydraulic Hoses

• Product Type :Industrial Hose
• Package Dimensions :9.652 Cm L X 6.604 Cm W X 2.54 Cm H
• Package Quantity :1
• Package Weight :0.3 Lbs

• These economical fittings resist mechanical pullout and disassembled repeatedly
• Can be assembled and disassembled repeatedly.
• Long dry seal pipe thread minimize leakage and provide more clearance for tightening flare nuts.
• Made form brass forgings to minimize strength and eliminate cracks.
• For flammable liquid, marine and gas applications.

• The motorized ball valve has switch instructions for easy understanding of operating status
• When fully opened or fully closed, the power is automatically cut off, reducing the possibility of overheating
• Open or close the valve within 3 - 5 seconds, after the valve is fully opened, the limit switch can reduce the power to a minimum
• Made of brass material, can withstand cold and hot pressure well, and has strong practicability
• Usually used to control the connection and cut - off of pipeline media, and is used for projects that require a long time to open the valve

• Material: The main body is made of 304 stainless steel, which is not easy to wear and burst compares to plastic material. It can work in a high-temperature environment.
• Thread protetion and durable : Thread of oil level sight glass are 1 Inch NPT. The thickness of the sight glass is 3mm you can easily observe the level of the oil by the glass sight window.
• Temperature & Pressure: Stainless steel oil sight glass gauge can work under pressure 800 PSI (55 bar) and temperature -30-120C(-22-248F). The sight window is qualified to pass strict pressure and temperature tests by our factory.
• Widely Application: Oil level sight glass used widely to check the oil level of the pump in the air compressor, gearbox?hydraulic oil tank . The actual liquid level position screw oil in the oil tank can be placed on the tank sight glass to see, to judge from the outside to run defenders screw oil meets the operating condition.
• Service: Our QC department do 100% quality inspection on the stainless steel sight glass before delivery. We will do 100% refund if the sight plug part is defective. Your valuable suggestions and advice will be greatly appreciated by our team.

• Hydraulic Dust Cap Keeps your couplers clean to prevent contamination and Protects hydraulic system by preventing dirt from entering via the quick coupler connection
• Resistant to mechanical damage , UV resistant , oil resistant,Elastic and tactile pleasant, Resistant to chemicals, Tear-Proof Design
• Fits ISO 7241 and ISO 5675 Series A like Parker 6600, Aeroquip 5600, and many others; Also fits many pneumatic couplings
• Each set has one male dust cap and one female dust cap
• Fits 1/2 body size AG Style couplers skid steer

• High strength, corrosion resistant coated steel, manufactured to exact specifications for hydraulic hoses.
• SAE J514 / JIC 37 degree Flare Connection
• Excellent for fluid power systems and other hydraulic applications
• Compatible with Parker HY-Series, and Weatherhead U-series
• Crimp with R1, R2, R3, R16, R17, industrial, and other thermoplastic hoses

• High strength, corrosion resistant coated steel, manufactured to exact specifications for hydraulic hoses.
• NPTF Pipe Thread is tapered and creates seal from threads
• Excellent for fluid power systems and other hydraulic applications
• Crimp with R1, R2, R3, R16, R17, industrial, and other thermoplastic hoses

• Adapter for connecting two different types of pipes or hoses
• Male National Pipe Taper Fuel (NPTF) threads and female National Pipe Straight Mechanical (NPSM) threads for connecting female pipe to male pipe
• Zinc-plated steel for strength and corrosion resistance
• Female NPSM end swivels to prevent hose stress due to twisting
• Compact design provides ease of assembly in confined areas

• Machined components are manufactured using brass bar stock
• Made of brass
• Nitrile (Buna-N) seals are standard, providing a temperature range of -40 degree F to +250 degree F
• External O-Ring on plug indicates full connection and acts as a contamination shield in connected mode
• Maximum pressure 3000 psi

• Quick disconnect coupling provide the flow needed to cool or heat molds and die casting dies
• Valved socket for automatic shut-off when line is disconnected
• Available with straight hose stem
• Made of brass
• Applications and markets: injection molding and heating and cooling

• Quick disconnect coupling provide the flow needed to cool or heat molds and die casting dies
• Valved socket for automatic shut-off when line is disconnected
• Available with 90 degrees hose stem
• Made of brass
• Applications and markets: injection molding and heating and cooling

• Stem union half consists of H37HHU01 stem
• Made of brass
• 3/8-inches hose inside diameter
• Comes with 9028 O-ring and HUSN1 sleeve