Electrical Components - Electrical Switches

• Material:Button cover is made of transparent plastic, strong and durable, not easy to break, and has a longer service life.
• Unique Design:Transparent and visual design, the base and sides can be removed, allowing you to better lock all kinds of power switches.
• Features:Remove the metal flat-head button switch, let it pass through the hole of the protective cover ,tear off the double sided tape on the back of power,push button switch cover, then stick it on the PC power button,and reinstall the button switch.
• Size:Emergency Stop Push Button Switch Size 55mm*55*77mm/2.16inch*2.16inch*3.03inch.
• Applications Wide:It is firmly installed on the emergency stop switch, or on the emergency stop button and other electrical appliances, and the lock must be opened to operate. It is a very practical tool for protecting the button switch.

• Rating Power(Max.) : AC 250V 6A, Current Rating(Max.): 6A, Voltage Rating(Max.): 250v
• The end holes of this light switch accept 1/4'' diameter lamp cord.
• The outside of this inline switch made of phenolic plastic.
• The inside of this lamp switch replacement have bronze double-wire contacts.
• Package Content : 2 x In Line Cord Switch

• 100% brand new and high quality Momentary Tactile Push Button Switch Assortment Kit combination of 25 common switch types.
• Tactile button switch: When the pressure is applied, the switch is turned on. When the pressure is released, the switch is closed, and the internal structure is forced to open and close by the metal spring.
• 10PCS for each value,total 250 pieces of the 25 values Tactile Switch Assortment Kit.
• Switch size: 2x4mm,3x4mm,3x4x2mm,3x6x2.5/3.5/4.3/5mm,4x4x0.8/1.5mm,4.5x4.5x1.5/3.8/5mm,6x6x3.1/4.3/5/12mm,12x12x5/7.3mm.The height of the dimension does not include the height of the pin.
• Suitable for TV, audio equipment, computers and other electronic products and household appliances,etc.

• 1.Type: 12v On/off Illuminated toggle switch. The required mounting hole diameter of this lighted toggle switch is 16mm.
• 2.Performance: This lighted toggle switch contains a 12-24V RGB (Red, Green, Blue) triple LED. Comparing with the previous LED toggle switch, this upgraded version enables a higher level of customized light styles. For example, you can choose one of colors such as red to light up when switches off; and when switch on, the red color can switch to another color such as blue.
• 3.Switch Rating: 20A 12VDC. Packed with 3 sets of Wires and Cable Ties. The length of the wires(including cable ties) with the illuminated toggle switch is about 15.8cm(6.22 inches).
• 4.Waterproof: Due to refer to the design of push button light switch, this LED waterproof toggle switch is IP67 waterproof without rubber boots. Please note: the switch housing and terminals behind of the panel are not waterproof.
• 5.Application: This 12 volt toggle switch can be used both indoors and outdoors, such as marine boat, car, truck, other automotives, etc.

• Solid forged brass for precise detail
• 5-Year warranty
• Available in all Nostalgic Warehouse finishes
• Mounting hardware included for easy installation

• Infrared Sensor Motion Sensor Switch can detect human movement by detecting infrared ray emitted by human body. It has high and stable sensitivity and can automatically identify day and night.
• Energy Saving Automatic turns on/off depended on people's motion, which can effectively save energy and improve efficiency. Our dusk to dawn motion sensor switch that automatically turn on at dusk and turn off when it's dawn
• Time Delay and Detection Range 5sec-10min adjustable, 2-12m adjustable, it can be adjusted according to your demand.
• Widely Used Good waterproof design, easy to install and use, can be used indoors and outdoors. Available in corridors, toilets, stairways, balconies, bathrooms, garages, etc.
• WARRANTY If you have any questions or receive goods not satisfied, please email us and our team will do our best to get back to you as soon as possible.We are looking forward to your suggestions about our improvement.

• OEM Part Number: The OEM number of this ESP button is 6131 9252 912 - 1, the motion button is 6131 9252 912 - 2, and the radar button is 6131 9252 912 - 3. Be careful not to buy the wrong one.
• Premium Material: This gear button is made of high-quality ABS material, which is wear-resistant, rust-resistant, fade-resistant, scratch-resistant and durable.
• Easy Installation: The installation of this ESP antislip switch is simple, the old or broken ones can be replaced directly, and it is easy to use and can be completed in a few simple steps.
• Perfect Match: This gear switch button kit is highly practical, can replace F20 F21 F22 F23 F30 F31 F34(GT) F35 F32 F33 F36, perfectly match your car.
• Excellent Performance: This ESP antislip switch is professionally manufactured, it has exquisite workmanship, high precision, stable performance and high reliability.

• 110/220-volt
• 10 amps switch
• Mounting size: 7/8 inch by 1-1/2 inch

• OVERVIEW - Don't want the whip light to drain your battery Or want to add a secure switch to control it Add Nirider lighted whip rocker switch! It have soft dual illumination lighting up the lower half from the dash illumination of your vehicle and the top once the selected device is active.
• DURABILITY - IP67 waterproof, over-current protection. The switch has been tested repeatedly to ensure safety and durability. All icon and text are lasered on switch face to ensure long life. Unlike other switches that use sticker or print prone to wear.
• FITS LIKE A GLOVE - Fits all whip lights in the market. Rated at 12V 20A and 24V 10A. Mounting hole size compatible with all vehicles, such as SXS, UTV, ATV, Offroad, Truck, Jeep, 4x4, Car, RV, Van, Boat.
• PLUG & PLAY - Just insert to your harness and whip light, then install the switch wherever you need it. Very easy to install.
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

• Resolution: -9.9-99.9 0.1 , other temperature ranges 1
• Environmental requirements: -10-60 , humidity 20% -85%
• Control accuracy: 0.1

• 1/2 HP Sewage pump moves up to 4,800 gallons per hour; pump will lift water up to 25' of vertical height
• Rugged cast iron construction; 10' cord length
• Tethered float switch to automatically turn the pump on/off.
• 2 inch NPT discharge, will handle up to 2 inch solids and features a non-clogging vortex impeller
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

• NO.1 QUALITY PRODUCT
• UNIQUE DESIGN
• LONG LIFE
• EXELLLENT LOOK

• Features a large paddle that turns the light or fan on/off
• Use with any 15 Amp load
• Matches existing decorator-style switches
• Works in 4-way applications
• package includes : 1 pcs