Electrical Components - Electrical Diodes

• Laser Shape: Dot. Outer diameter: 6 mm.
• Wavelength: 650nm. Working Voltage: 5v.
• Operating Current: must less than 20 Ma.
• Can be used to connect diode tubes for multiple use

• 8MM RGB Auto Flash Multicolor Changing Transparent Bright LED, DC 3 Volt
• Flash Type : Auto Slow and Fast
• Multipurpose For Science Projects DIY Hobby Kit, Electronic Devices
• Package Contains - 50 Pieces

• Zener Diodes Kit-Box Kit Set (8.2V/9.1V/10V/11V/12V/13V/15V/16V/18V/22V)-(100 Nos)-total 100qty
• Power Source: DC

• Operating Voltage: 5V
• Output Wavelength: 650 nm
• 3 pins module

• Photodiode Receiver can be used for various applications like used in remote control reception, distance sensor, object sensors, line sensors etc.
• Transmitter Diode can be used for various applications like used in remote controls, distance sensor, object sensors, line sensors etc.
• Working wavelength: 925-955nm (most commonly used)
• Size: 5mm
• Package Contents: 5 x Receiver Photodiode; 5 x Transmitter Photodiode

• KBPC5010 50A 1000V Bridge Rectifier

• Maximum repetitive peak reverse voltage : 800V
• Maximum RMS voltage : 560V
• Minimum DC Breakdown Voltage : 800V
• Peak Forward Surge Current : 350A
• Maxim reverse current : 5?A

• Diffused Junction; High Current Capability and Low Forward Voltage Drop
• Surge Overload Rating to 30A Peak; Low Reverse Leakage Current
• Lead Free Finish, RoHS Compliant;
• Peak Repetitive Reverse Voltage/Working Peak Reverse Voltage/DC Blocking Voltage: 1000V
• Weight: 0.30 grams (Approximate)

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• Tested and 100% Working
• Housing Material: Copper
• Operating Voltage: 3~5VC
• Output Power: 5mW, Wavelength: 650nm, Working Current: <40mA

• The MBR20100CT - 100V 20A Dual High Voltage Schottky Rectifier is a dual Schottky diode with common cathode in a To-220 Package for high current applications.
• Each diode has a forward current of 10A, hence the IC can push up to 20A through it with a peak reverse voltage of 100V.
• The MBR20100 is a rectifier dual diode that is commonly used in Converter circuits.

• IN PACK OF 10

• A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. It is used to reduce current flow, adjust signal levels, divide voltages in electronic circuits, among other uses. The 40 value resistor kit by Robotbanao includes of various electrical components for DIY projects.
• Package component count:40(1000 pieces, 25 pieces each)

• KBPC3510 1KV 35A Single Phase Bridge Rectifier Diode Electronic Components Electronic Hobby Kit Electronic Components Electronic Hobby Kit |Pack of 4

• Voltage Rating: 10V; Power Rating: 500mW (1/2 watt)
• Vz-tolerance: + 5%; High reliability; Very sharp reverse characteristic
• Package: DO-35-2; Zener Current: 1uA; Test Current: 5 mA; Mounting Type: Through Hole
• Voltage regulator; Voltage Protection; Over Voltage Protection etc.
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Voltage Rating: 12V
• Power Rating: 500mW
• High reliability
• Very sharp reverse characteristic
• Vz-tolerance: + 5%

• Lens: 5mm Diameter / Transparent & Black / Round
• IR Receiver - Power: 0.15 W; Receiving Angle: 40 degrees; Maximum power: 70 mw; Maximum forward current: 30 ma; Voltage (VF) : 1.1-1.4 V; Wave long (WD) : 940 nm;
• IR Transmitter: Emitting Color: IR Emitter 940nm; Luminous Intensity: Invisible Light. Forward Voltage / Current: 1.2-1.5V | 20mA
• Note:The infrared Transmitter is Transparent clear lens & receiver has black lens, when the power supply to it, can not see the light as it is a IR LED
• Package Include 50 x IR Transmitter, 50 x Receiver