Electrical Components - Electrical Diodes

• Repetitive peak reverse voltage: 800V
• Surge peak reverse voltage: 800V
• Repetitive peak forward current: 20 A
• Junction and Storage temperature: -50 deg C to +150 deg C

• High reliability
• Very sharp reverse characteristic
• Vz-tolerance: + 5%
• Voltage Rating: 9.1V
• Power Rating: 250mW

• Zener diode(100pices)-Capacitor(100pices) -Resisitor (150pices) Components
• Resistor 10 Ohm 15 Ohm 220 Ohm 330 Ohm 470 Ohm 680 Ohm 1K Ohm 2K2 Ohm 3K3 Ohm 4.7K Ohm 6.8K Ohm 10K ,150k,100k,330k,470k,Ohms CFR Assorted Carbon Film Resistors Students DIY Project Package Kit 1/4 Watts (100 Nos)
• Zener Diodes Kit, Pack of 100pcs Kit 1W Axial Leads Through Hole Power Diode Assorted Assortment Box Kit Set (8.2V/9.1V/10V/11V/12V/13V/15V/16V/18V/22V), Range 1N4738~1N4758
• Most useful and cost effective combo of capacitors-resistors-transistors ever
• Power Dissipation : 1/4 Watt Ideal for DIY Electronic Projects

• 100 Pcs Super Bright 5mm LED
• Red
• Transparent Clear body
• Nominal Current 25mA
• Use suitable resistance when driving voltage is above 3V approximately

• Magnetic Type: Omnipolar; Mounting Type: Surface Mount; Pin Count: 3; Minimum Operating Supply Voltage: 2.5V; Maximum Operating Supply Voltage: 5.5V
• Output Current: 1mA; Minimum Magnetic Sensor Release Point: 10Gs; Maximum Magnetic Sensor Operating Point: 60Gs; Typical Magnetic Sensor Hysteresis 15Gs; Minimum Operating Temperature -40 degreeC; Maximum Operating Temperature +85 degreeC
• Dimension:- Length: 3.1mm; Width: 1.7mm; Height: 1.3mm
• Applications:- Sensing & Instrumentation; Communications & Networking; Computers & Computer Peripherals; Consumer Electronics; Cover switch in clam-shell cellular phones; Cover switch in Notebook PC/PDA; Contact-less switch in consumer products
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Educational Robotics Kits: These kits are designed for students and beginners to learn the basics of robotics, programming, and electronics. They often include building blocks, motors, sensors, and microcontrollers, along with instructions and tutorials to help users build and program simple robots.
• DIY Robotics Kits: Do-it-yourself robotics kits cater to hobbyists and enthusiasts who enjoy building and experimenting with robots. These kits may include components like servo motors, sensors (such as ultrasonic, infrared, and gyroscopic sensors), microcontrollers (like Arduino or Raspberry Pi), chassis, wheels, and structural parts. They often come with assembly instructions and may involve soldering and programming.
• Robot Arms and Manipulators: These kits focus on robotic arms and grippers used for tasks such as pick-and-place operations, assembly, and manipulation. They typically include servo motors, gears, linkages, and control interfaces. Some advanced kits may also incorporate computer vision or machine learning for object recognition and manipulation.
• Mobile Robot Kits: Mobile robot kits are designed for building robots that can navigate their environment autonomously or via remote control. These kits often include motors, wheels, chassis, sensors (such as proximity sensors, line-following sensors, and IMUs), microcontrollers or single-board computers, and communication modules (like Bluetooth or Wi-Fi). They can be used for applications such as exploration, surveillance, and delivery.
• Drone Kits: Drone kits allow users to build and customize their own unmanned aerial vehicles (UAVs). They typically include frame components, motors, propellers, flight controllers, batteries, and remote control systems. Drone kits come in various sizes and configurations, from small quadcopters for indoor flight to larger multirotors for outdoor aerial photography and videography.

• 1. Durable and practical,portable,very convenient to install and repair.
• 4.Power Diode Module MDS-100A is designed for three phase full rectification, which has six diodes connected in a three phase bridge configuration.
• 3. Can be used to PWM inverter electric current input,battery charging,etc
• 2. Welding structure,excellent power cycling and temperature features
• 5.Output DC current is 100A.Maximum valuee voltage is up to 1,600V. Isolated mounting base, High reliability by unique glass passivation.

• D35SB80 Single Phase 800V 35A Bridge Rectifier
• Through Hole Bridge Rectifier
• Multipurpose Use, Electronic Circuit Repair
• Qty.: 3 Pieces

• KBPC5010 Data: Forward rectified current:50A,Maximum recurrent peak reverse voltage:1000V
• Feature:Low Reverse Leakage Current /Low Power Loss/ High Efficiency
• Case:Electrically Isolated Metal Case for Maximum Heat Dissipation, Case to Terminal Isolation Voltage 2500V
• Terminals: Plated Leads Solderable per MIL-STD-202, Method 208
• Polarity: Symbols Marked on Case

• GBJ3510 35 Amp 1000 Volts Glass Passivated Single Phase Bridge Rectifier
• Low forward voltage drop,high current capability, Always use Heat sink for Better Performance.
• Ideal for printed circuit boards , SMPS , Invertors and other Power Applications.
• New & Original Heavy Duty Bridge Rectifier.

• Maximum respective peak reverse voltage : 200v
• Maximum average rectified current : 1.5A
• Maxim reverse current : 5.0?A
• Case : DO-15
• Non-Repetitive Peak Forward Surge Current : 60A

• Maximum respective peak reverse voltage : 600v
• Maximum average rectified current : 1.5A
• Maxim reverse current : 5.0?A
• Case : DO-15
• Non-Repetitive Peak Forward Surge Current : 60A

• Maximum respective peak reverse voltage : 800v
• Maximum average rectified current : 6.0A
• Maxim reverse current : 10?A
• Case : R-6
• Non-Repetitive Peak Forward Surge Current : 300A

• Maximum respective peak reverse voltage : 800v
• Maximum average rectified current : 3.0A
• Maxim reverse current : 10?A
• Case : DO-201AD
• Non-Repetitive Peak Forward Surge Current : 200A